TABLE OF CONTENTS
- 1.3.1 Turn Select Light on entered % bright in light color (selected color)
- 1.3.2 Turn Select Light ON
- 1.3.3 Turn Select Light OFF
- 1.3.4 Set color of Select Light to desired light color
- 1.3.5 Set brightness of Select Light to entered %
- 1.3.6 Fade out Select Light at Slow speed
- 1.3.7 Fade in Select Light to entered % bright in light color at Slow speed
- 1.3.8 Get state of Select Light
- 1.3.9 Get brightness of Select Light
- 1.3.10 Get color of Select Light
1.3.1 Turn Select Light on entered % bright in light color (selected color)
Turn on light with said brightness and color.
Example 1.3.1:
Before execution:
After execution:
1.3.2 Turn Select Light ON
Turn ON or Turn OFF the light.
Example 1.3.2:
Before execution:
After execution:
1.3.3 Turn Select Light OFF
Turn ON or Turn OFF the light.
Example 1.3.3:
During execution: Before execution Sim light will be OFF. As the execution starts the Light will ON for 2 seconds and goes OFF.
After execution:
1.3.4 Set color of Select Light to desired light color
Set color of light. Note that this block does not turn the light ON.
Example 1.3.4:
Before execution:
After execution:
1.3.5 Set brightness of Select Light to entered %
Set brightness of light. Note that this block does not turn light ON.
Example 1.3.5:
Before execution:
After execution: As the execution starts the light will be on for 2 seconds with less brightness but as it executes set brightness increases, the brightness of the light increases.
1.3.6 Fade out Select Light at Slow speed
Fade out the light.
Example 1.3.6:
Before execution:
After execution:
1.3.7 Fade in Select Light to entered % bright in light color at Slow speed
Fade in light with said brightness and color.
Example 1.3.7:
Before execution:
After execution:
1.3.8 Get state of Select Light
Get current state of light, 1 means On and 0 means off.
Example 1.3.8:
Before execution:
After execution:
1.3.9 Get brightness of Select Light
Get current brightness set on light.
Example 1.3.9:
Before execution:
After execution:
1.3.10 Get color of Select Light
Get the current color set on light.
Example 1.3.10:
Before execution:
After execution: